Ejma Standards Pdf Free 72 ##VERIFIED##

Ejma Standards Pdf Free 72 ##VERIFIED##

Click Here >>>>> https://fancli.com/2tdjzg

The metering of the expansion and application of the correction factor is carried out according to the norms, either via the device described in VDE 17 Part 1 or have been established in accordance with U. THV-Available

10.7.1 In some deambulation systems, set parameters can be updated directly by the master controller, e. g. for the expansion compensation, when certain conditions (reconciliation,...) are met. For example, the expansion compensation can be set to one or more degrees. These parameters can be read out using the ERTS (environmental control system) or via the EJMA, which is installed at the load point.

10.7.2 The expansion compensation can be directly set via the master controller of the deambulation system. If optional the expansion compensation of at least one degree is permissible. The deambulation master controller's expansion compensation is mapped via the ERTS.

10.7.3 The ERTS can provide the expansion compensation directly. In order for this, the ERTS is capable of implementing a control on/off of the expansion compensation. Furthermore, the ERTS can also be equipped with a print function for documenting the expansion correction. The expansion compensation is controlled either via the master controller of the deambulation system or via the ERTS. The compensation factors can be read from the ERTS. d2c66b5586